0 CAD 0.00
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…

In Stock

Out of Stock

Sorry, we could not find the stock amount. Try reloading the page.
no stock information available
To cart
Quote Me
Checkout
0
Weldmark

Series 1-GPN Cutting Tip Oxygen/Natural Gas, Propane Two Piece with Spline Insert Size: 5

Category Cutting Tips
WEM5-GPN
Call for price
Starting from
CAD 36.43 / EACH
/
%
- +
Change order preference in the cart.
Weldmark

Series 1-GPN Cutting Tip Oxygen/Natural Gas, Propane Two Piece with Spline Insert Size: 5

Locations: In Stock Available to Order
Item Code: WEM5-GPN
The Weldmark® by Victor® 1-GPN series Oxy-Fuel Size 5 Cutting Tip has a 5 inch cutting capacity. This general purpose 1-GPN series tip is two pieces with a spline insert. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 6-10 inches per minute with an average kerf width of 0.14". It's designed for use with Natural Gas or Propane. The max Propane pressure is 12 and the max oxygen cutting pressure is 55. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.
Category Cutting Tips

Fetching product details


The Weldmark® by Victor® 1-GPN series Oxy-Fuel Size 5 Cutting Tip has a 5 inch cutting capacity. This general purpose 1-GPN series tip is two pieces with a spline insert. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 6-10 inches per minute with an average kerf width of 0.14". It's designed for use with Natural Gas or Propane. The max Propane pressure is 12 and the max oxygen cutting pressure is 55. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.
  • Brand : Weldmark
  • Category : Cutting Tips
  • Country Of Origin : Mexico
  • Height : 0.800 in
  • Length : 0.800 in
  • Width : 0.800 in

Fetching product details


The Weldmark® by Victor® 1-GPN series Oxy-Fuel Size 5 Cutting Tip has a 5 inch cutting capacity. This general purpose 1-GPN series tip is two pieces with a spline insert. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 6-10 inches per minute with an average kerf width of 0.14". It's designed for use with Natural Gas or Propane. The max Propane pressure is 12 and the max oxygen cutting pressure is 55. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen and fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a molten metal. A stream of gas blows the molten metal away from the work area, resulting in a clean cut.
  • Brand : Weldmark
  • Category : Cutting Tips
  • Country Of Origin : Mexico
  • Height : 0.800 in
  • Length : 0.800 in
  • Width : 0.800 in
SEARCH ×